联系我们
江苏金鹰润滑材料(金湖)有限公司
电话:hy8590发现财富
传真:0517-86986939
邮箱:4103850007@qq.com
地址:江苏金湖工二路19号优尚JY6063合成油气润滑油
作者:金鹰润滑材料(金湖)有限公司点击量:402发布时间:2019-04-12 04:46
优尚JY6063合成油气润滑油适用于钢厂油气润滑系统,各种中,低速,中负荷闭式工业齿轮,涡轮蜗杆,滑动,滚动轴承的润滑。优尚JY6063合成油气润滑油使用温度范围:1--~460号油为-30℃~+200℃, 680号油为-25℃~+200℃,短期可耐220℃
This product is suitable for lubrication of steel mills lubrication system, all kinds of low-speed, medium-load closed industrial gears, turbine worm, sliding, rolling bearing lubrication.Operating temperature range: 1-- ~ 460 oil is -30 ℃ ~ +200 ℃, 680 oil is -25 ℃ ~ +200 ℃, short-term resistance to 220 ℃
优尚JY6063合成油气润滑油产品描述PRODUCT DISCRIPTION
优尚JY6063合成油气润滑油是以合成油为基础油,并加有极压,抗磨等多种添加剂精制而成的油气润滑剂。This product is based on synthetic oil, and add extreme pressure, anti-wear and other additives refined oil and gas lubricants.
优尚JY6063合成油气润滑油产品特点PRODUCT FEATURES
优异的粘温性能 Excellent viscosity-temperature performance
优异的低温流动性能,保证设备在较低温度下也能正常运行Excellent low-temperature flow properties, to ensure that equipment at lower temperatures can be normal operation
优异的耐热稳定性能,防止油品在高温下变质
Excellent heat stability, to prevent oil deterioration at high temperatures
良好的极压抗磨性能,减少设备磨损Good extreme pressure anti-wear performance, reduce equipment wear and tear
在高温下长期使用不结焦,无沉淀物Long-term use at high temperatures without coking, no sediment
优尚JY6063合成油气润滑油主要理化指标 PHYSICOCHENICAL
优尚JY6063合成油气润滑油包装形式PACKING FORM
16kg/200L铁桶 16kg/200L iron barrel
优尚JY6063合成油气润滑油注意事项ANNOUNCEMENTS
首次使用时,应将润滑系统清洗干净。勿与其他油品混用,不同润滑油之间可能会发生物理或者化学反应导致性能大大下降。
When used for the first time, the lubrication system should be cleaned. Do not mix with other oils, different lubricants may occur between the physical or chemical reaction led to a significant decline in performance.
使用后及时封盖以避免水分,灰尘等杂质混入
Cover after use to avoid moisture, dust and other impurities mixed
使用温度在100℃以内时,可用丁晴胶制密封件,持续温度较高时,建议采用氟橡胶或硅橡胶密封件
Use temperature is less than 100 ℃, the available Dingqing plastic seals, continuous high temperature, it is recommended to use fluorine rubber or silicone rubber seals
本产品对工业漆不适,建议采用环氧树脂或改性酚醛树脂涂料,油位计宜采用玻璃或聚酰胺材料制品。
This product is not suitable for industrial paint, it is recommended to use epoxy resin or modified phenolic resin coating, oil level gauge should adopt glass or polyamide material products.
This product is suitable for lubrication of steel mills lubrication system, all kinds of low-speed, medium-load closed industrial gears, turbine worm, sliding, rolling bearing lubrication.Operating temperature range: 1-- ~ 460 oil is -30 ℃ ~ +200 ℃, 680 oil is -25 ℃ ~ +200 ℃, short-term resistance to 220 ℃
优尚JY6063合成油气润滑油产品描述PRODUCT DISCRIPTION
优尚JY6063合成油气润滑油是以合成油为基础油,并加有极压,抗磨等多种添加剂精制而成的油气润滑剂。This product is based on synthetic oil, and add extreme pressure, anti-wear and other additives refined oil and gas lubricants.
优尚JY6063合成油气润滑油产品特点PRODUCT FEATURES
优异的粘温性能 Excellent viscosity-temperature performance
优异的低温流动性能,保证设备在较低温度下也能正常运行Excellent low-temperature flow properties, to ensure that equipment at lower temperatures can be normal operation
优异的耐热稳定性能,防止油品在高温下变质
Excellent heat stability, to prevent oil deterioration at high temperatures
良好的极压抗磨性能,减少设备磨损Good extreme pressure anti-wear performance, reduce equipment wear and tear
在高温下长期使用不结焦,无沉淀物Long-term use at high temperatures without coking, no sediment
优尚JY6063合成油气润滑油主要理化指标 PHYSICOCHENICAL
分析项目 | 100 | 150 | 220 | 320 | 460 | 680 |
运动粘度100℃ 40℃ |
17.29 100.7 |
24.96 158 |
33.8 226.7 |
48.34 325 |
68.05 462.3 |
103.9 665.8 |
粘度指数 | 284 | 194 | 207 | 210 | 224 | 236 |
闪点(开口),℃ | 254 | 266 | 271 | 271 | 275 | 275 |
倾点℃ | -42 | -40 | -36 | -36 | -33 | -30 |
铜腐蚀100℃,3Hr | 1b | 1b | 1b | 1b | 1b | 1b |
16kg/200L铁桶 16kg/200L iron barrel
优尚JY6063合成油气润滑油注意事项ANNOUNCEMENTS
首次使用时,应将润滑系统清洗干净。勿与其他油品混用,不同润滑油之间可能会发生物理或者化学反应导致性能大大下降。
When used for the first time, the lubrication system should be cleaned. Do not mix with other oils, different lubricants may occur between the physical or chemical reaction led to a significant decline in performance.
使用后及时封盖以避免水分,灰尘等杂质混入
Cover after use to avoid moisture, dust and other impurities mixed
使用温度在100℃以内时,可用丁晴胶制密封件,持续温度较高时,建议采用氟橡胶或硅橡胶密封件
Use temperature is less than 100 ℃, the available Dingqing plastic seals, continuous high temperature, it is recommended to use fluorine rubber or silicone rubber seals
本产品对工业漆不适,建议采用环氧树脂或改性酚醛树脂涂料,油位计宜采用玻璃或聚酰胺材料制品。
This product is not suitable for industrial paint, it is recommended to use epoxy resin or modified phenolic resin coating, oil level gauge should adopt glass or polyamide material products.
文章标题:优尚JY6063合成油气润滑油
文章地址:/gyrhy/20190412_66.html
金鹰化工供应商为您提供优尚JY6063合成油气润滑油信息,可查看优尚JY6063合成油气润滑油特点、参数、应用等。优尚JY6063合成油气润滑油厂家提供全网优质货源,可在线咨询优尚JY6063合成油气润滑油加工批发价格具体多少钱,金鹰化工--您可信赖的优尚JY6063合成油气润滑油厂家。
上一篇:优尚JY6962油气润滑专用油
下一篇:没有了